[Zmagnette] Paint
Steve Kirby
skirby210 at cox.net
Wed Dec 25 12:55:36 MST 2013
also agree! Beautiful job, and your advice is spot on.
----- Original Message -----
From: John Elwood
To: List for the Z Magnette Group - North America
Sent: Wednesday, December 25, 2013 11:04 AM
Subject: Re: [Zmagnette] Paint
Are you painting it yourself? If you aren't, the people who paint it will have their own opinions!
If you're doing it yourself, check out PPG Concept. For me that meant an epoxy primer on the steel. Over the epoxy primer went any body filler, then epoxy primer again when it was roughly correct. Over that went the regular sandable primer, coat after coat before I could get it right. Then painted the car with a Concept DCC which is single stage solid color. Came out terrible, and it was all my fault! Every ripple and wave showed up, and I had thought it was pretty good before I painted it. Anyway, it wasn't, and I did it all over again. Second time? PERFECT!
The product was very expensive, but very forgiving, and never the cause of my problems. When I do the Magnette this spring, I will use PPG Concept again in a heartbeat.
------------------------------------------------------------------------------
------------------------------------------------------------------------------
------------------------------------------------------------------------------
_______________________________________________
Zmagnette mailing list
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/zmagnette/skirby210@cox.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/zmagnette/attachments/20131225/ec5e3cef/attachment-0001.html>
More information about the Zmagnette
mailing list