[Zmagnette] Fwd: Uncaught bounce notification

[Allen Bachelder]

Mike Hickman has tried to send this message to the list but something caused it to bounce. I'm hoping Mark Bradakis will advise me how to solve it, but in the meantime, responses to Mike's question - below - would be appreciated.

Mike, it just so happens that I installed my wheel boxes and tubes before installing the scuttle vent, and had no problem. I didn't try to do it the other way 'round.  If you're having  a problem, this might be at least part of your answer. If you do remove the scuttle vent and mechanism, draw a lot of pictures and make notes to yourself on how it comes apart because I remember there were just a whole lot of incorrect ways to put it back together such that everything fits but nothing works!

FWIW,
Allen
****************************************************************
Allen & Florrie Bachelder       =iii=<
Spring Creek Home for Wayward MGs
'57 ZB, '65 B, '69 C/GT, '73 B/GT
North Street, MI 48049, USA
http://www.mgexperience.net/member/bachldrs
NAMGAR GT39 - REGISTER TODAY!
http://www.namgar.com/events/article/gt-39_ottawa_ontario/gt-39_get_ready_for_a_whole_lot_of_fun
**********************************************************************************************************************




> 
> From: "Mike Hickman" <mgmike62 at gmail.com>
> Date: April 2, 2014 9:38:39 AM EDT
> To: "Z Magnette Group" <zmagnette-bounces at autox.team.net>
> Subject: Wheel Boxes
> 
> 
> Trying to install the wheel boxes in my Magnette and it seems as if it would be easier to install them if the Scuttle Vent is removed, is this the case?
>  
> Thanks,
> Mike H.
> 
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/zmagnette/attachments/20140402/b04de201/attachment-0001.html>