[Zmagnette] Fwd: Uncaught bounce notification

[Mike]

Steve H,
Does the Scuttle Vent need to come out?

Mike H.

> On Apr 2, 2014, at 11:58 AM, Steve Hanegan <steve at betterwitnesses.com> wrote:
> 
> The rubber bits around the wheel boxes on the inside of the cowl are only really necessary if you want to keep water on the outside of the car from getting inside the car... While they are off, it wouldn't hurt to soak and rub those wheel box rubbers in/with some warm olive oil to return some of their suppleness...
> 
> MG put very few unnecessary or "extra" parts in their cars.
> 
> Steve H.
> 
>  
>> On Apr 2, 2014, at 8:45 AM, Mike <mgmike62 at gmail.com> wrote:
>> 
>> Thanks Allen,
>> Usually I get the posts back, when I don't I figure it didn't go through, the Rubber pieces that go around the wheel box shafts are the problem and I wonder if they are really necessary? The Scuttle vent is already installed and I HATE to take it back apart. One step forward two steps back....
>> Thanks,
>> Mike
>> 
>>> On Apr 2, 2014, at 11:15 AM, Allen Bachelder <bachldrs at comcast.net> wrote:
>>> 
>>> Mike Hickman has tried to send this message to the list but something caused it to bounce. I'm hoping Mark Bradakis will advise me how to solve it, but in the meantime, responses to Mike's question - below - would be appreciated.
>>> 
>>> Mike, it just so happens that I installed my wheel boxes and tubes before installing the scuttle vent, and had no problem. I didn't try to do it the other way 'round.  If you're having  a problem, this might be at least part of your answer. If you do remove the scuttle vent and mechanism, draw a lot of pictures and make notes to yourself on how it comes apart because I remember there were just a whole lot of incorrect ways to put it back together such that everything fits but nothing works!
>>> 
>>> FWIW,
>>> Allen
>>> ****************************************************************
>>> Allen & Florrie Bachelder       =iii=<
>>> Spring Creek Home for Wayward MGs
>>> '57 ZB, '65 B, '69 C/GT, '73 B/GT
>>> North Street, MI 48049, USA
>>> http://www.mgexperience.net/member/bachldrs
>>> NAMGAR GT39 - REGISTER TODAY!
>>> http://www.namgar.com/events/article/gt-39_ottawa_ontario/gt-39_get_ready_for_a_whole_lot_of_fun
>>> **********************************************************************************************************************
>>> 
>>> 
>>> 
>>> 
>>>> 
>>>> From: "Mike Hickman" <mgmike62 at gmail.com>
>>>> Date: April 2, 2014 9:38:39 AM EDT
>>>> To: "Z Magnette Group" <zmagnette-bounces at autox.team.net>
>>>> Subject: Wheel Boxes
>>>> 
>>>> 
>>>> Trying to install the wheel boxes in my Magnette and it seems as if it would be easier to install them if the Scuttle Vent is removed, is this the case?
>>>>  
>>>> Thanks,
>>>> Mike H.
>>> 
>>> _______________________________________________
>>> Zmagnette mailing list
>>> 
>>> Donate: http://www.team.net/donate.html
>>> Archive: http://www.team.net/archive
>>> Forums: http://www.team.net/forums
>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/zmagnette/mgmike62@gmail.com
>> _______________________________________________
>> Zmagnette mailing list
>> 
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/zmagnette/steve@betterwitnesses.com
> 
> _______________________________________________
> Zmagnette mailing list
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/zmagnette/mgmike62@gmail.com
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/zmagnette/attachments/20140402/51cb1972/attachment-0001.html>