[Zmagnette] New Member

Sun Jan 19 17:14:14 MST 2014

Hi ALL,
Appreciate the Welcome/RAPID Responses.  Dee, She Originally Came w/the Oil Bath, Mizplaced it Long Ago. 
I Believe I Found a Dry(Original)Air Cleaner, from a Gentleman in Virginia (Craigs Lizt) via MGe.
A Very Special GraciaZ to the Man, Mr.Allen B.  Get'Z thing's GOIN.
       Michael.

To: zmagnette at autox.team.net
From: deemg4 at aol.com
Date: Sun, 19 Jan 2014 17:16:03 -0500
Subject: Re: [Zmagnette] New Member

Michael,

If you are looking for a oil bath air cleaner, Wayne has at least one, it is in ruff shape, but can be cleaned.

DEE JOHNSON 

-----Original Message-----

From: Steve Hanegan <steve at betterwitnesses.com>

To: List for the Z Magnette Group - North America <zmagnette at autox.team.net>

Sent: Sun, Jan 19, 2014 1:08 pm

Subject: Re: [Zmagnette] New Member

Welcome to the tribe Michael!

Steve H.

1958 ZB in black

Seattle

On Jan 19, 2014, at 12:34 PM, Edward Collins <ed3paula at aol.com> wrote:

Welcome Michael.

Ed Collins. Springfield, MA .   '57 ZB

Sent from my iPad

On Jan 18, 2014, at 7:08 PM, Allen Bachelder <bachldrs at comcast.net> wrote:

Hi Gang,

We have a new member! From way up in northern California - a lot closer to Oregon than San Francisco, we have Michael Mitchell, proud owner of a '58 ZB.  Such a Magnette freak - he has retired the letter "S" from his computer keyboard, replacing it with the more important letter "Z".  I hope you will all join me in welcoming a true Magnette enthusiast: Michael Mitchell.  

Michael and I met on MGE where he asked me about venting the crankcase with the aftermarket aluminum valve cover.  I told him that I have been using a vented oil filler cap, along with the usual vent from the front tappet cover to the bottom of the sump - only since I'm using the Basil Adams tappet cover (which I LOVE!), I had to drill/tap that for a crankcase vent.  At any rate, Michael needs two things: a correct original ZB air cleaner; and some advice as how best to rig his venting (since he has the aluminum valve cover).  Drilling the aluminum cover to plumb to the air cleaner is a little bit easier said than done as it involves drilling down through the cast aluminum ribs with a Forstner type bit first to get a nice seal from the hose fitting to the cover.  Any suggestions would be most welcome.

Cheers, gang!

Allen

****************************************************************

Allen & Florrie Bachelder       =iii=<

Spring Creek Home for Wayward MGs

'57 ZB, '65 B, '69 C/GT, '73 B/GT

North Street, MI 48049, USA

http://www.mgexperience.net/member/bachldrs

****************************************************************

_______________________________________________

Zmagnette mailing list

Donate: http://www.team.net/donate.html

Archive: http://www.team.net/archive

Forums: http://www.team.net/forums

Unsubscribe/Manage: http://autox.team.net/mailman/options/zmagnette/ed3paula@aol.com

_______________________________________________

Zmagnette mailing list

Donate: http://www.team.net/donate.html

Archive: http://www.team.net/archive

Forums: http://www.team.net/forums

Unsubscribe/Manage: http://autox.team.net/mailman/options/zmagnette/steve@betterwitnesses.com

_______________________________________________
Zmagnette mailing list

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/zmagnette/deemg4@aol.com

_______________________________________________
Zmagnette mailing list

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/zmagnette/mdmzoila@hotmail.com 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/zmagnette/attachments/20140119/06711a93/attachment.html>