[Zmagnette] Workshop Manual
Paul Barrow
paul.barrow at centurytel.net
Fri May 16 22:20:21 MDT 2014
That is correct Steve H - Windows Systems only :( but then we do make that
very clear on the page ... hopefully! We certainly have no intention of
hiding that and thanks for mentioning it.
Paul
Paul Barrow
153 Clemons Road
Montesano, WA 98563 USA
+1 360 249 5123 Landline
+1 360 500 9389 Cell phone
+1 360 249 3776 Fax
Paul.Barrow at centurytel.net
-----Original Message-----
From: Steve Hanegan [mailto:steve at betterwitnesses.com]
Sent: Friday, May 16, 2014 9:15 PM
To: paul.barrow at centurytel.net; List for the Z Magnette Group - North
America
Subject: Re: [Zmagnette] Workshop Manual
Unfortunately, they do not work if you use Apple computers... But they do
work a treat if you use Windows based PCs
Sent from Steve's iPad (Steve H) remotely...
> On May 16, 2014, at 3:34 PM, "Paul Barrow" <paul.barrow at centurytel.net>
wrote:
>
> John et al, if it is Magnette ZA or ZB manuals you are after these are
> already available (with much more) from YZ Publications on
> http://www.mg-cars.org.uk/imgytr/stores/yzpublications.shtml at a mere $25
> each plus shipping for MG ZA and MG ZB/ZBV.
>
> Paul
>
> Paul Barrow
> 153 Clemons Road
> Montesano, WA 98563 USA
> +1 360 249 5123 Landline
> +1 360 500 9389 Cell phone
> +1 360 249 3776 Fax
> Paul.Barrow at centurytel.net
>
> -----Original Message-----
> From: zmagnette-bounces at autox.team.net
> [mailto:zmagnette-bounces at autox.team.net] On Behalf Of Jon Marino
> Sent: Friday, May 16, 2014 3:23 PM
> To: zmagnette at autox.team.net
> Subject: [Zmagnette] Workshop Manual
>
> Thank you kindly, folks. I will try Cecilia, but if Mike wants to copy the
> BMC manual for me, right on. Email me and I will send you my information.
> I'm not sure what the protocol is for such a thing on this mailing list,
but
> hopefully I'm going about it correctly.
> Best and peace out,
>
> Jon M.
>
> -----Original Message-----
> From: zmagnette-bounces at autox.team.net
> [mailto:zmagnette-bounces at autox.team.net] On Behalf Of
> zmagnette-request at autox.team.net
> Sent: Friday, May 16, 2014 7:29 AM
> To: zmagnette at autox.team.net
> Subject: Zmagnette Digest, Vol 8, Issue 44
>
> Send Zmagnette mailing list submissions to
> zmagnette at autox.team.net
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://autox.team.net/mailman/listinfo/zmagnette
> or, via email, send a message with subject or body 'help' to
> zmagnette-request at autox.team.net
>
> You can reach the person managing the list at
> zmagnette-owner at autox.team.net
>
> When replying, please edit your Subject line so it is more specific than
> "Re: Contents of Zmagnette digest..."
>
>
> Today's Topics:
>
> 1. Re: Oil pipe (steve grundt)
> 2. Re: List Problems (webuck1 at cox.net)
> 3. Re: Workshop Manuel (michael mitchell)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Thu, 15 May 2014 22:07:03 -0400
> From: steve grundt <slgrundt at gmail.com>
> To: List for the Z Magnette Group - North America
> <zmagnette at autox.team.net>
> Subject: Re: [Zmagnette] Oil pipe
> Message-ID:
> <CAEnCJFRBmN+b8n23bAE2nshVY6nODbY9P3AOt6yJVZ4BjK6GXg at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> i went to auto zone and bought a copper line and one extra adapter fitting
i
> had laying around ran that from engine to gauge works fine
>
>
>> On Mon, May 12, 2014 at 7:42 AM, <wraylemke at compuserve.com> wrote:
>>
>> I may be wrong about the steel pipe from the gauge to the flex hose; I
>> might have used an old MGB steel pipe, sweated the ends off, then
>> built one from copper that was the right length.
>>
>> I can't remember for sure, but that is probably what I did. I think I
>> found that the fittings from the MGB pipe fit the Magnette gauge. I
> think...
>>
>> Wray
>>
>>
>> -----Original Message-----
>> From: wraylemke <wraylemke at compuserve.com>
>> To: zmagnette <zmagnette at autox.team.net>
>> Sent: Mon, May 12, 2014 7:37 am
>> Subject: Re: [Zmagnette] Oil pipe
>>
>> Arch, my oil line was cobbled together from various bits by the PO. I
>> looked at it one day just before taking the car out and thought, "I
>> really need to fix that". Sure enough, it blew off going down the
>> interstate, spewing oil all over the hot exhaust resulting in clouds
>> of smoke that brought visibility to near zero behind me.
>>
>> I ended up replacing the whole thing. If I recall, the line from the
>> gauge to the OE rubber flex hose was steel, I unsoldered the ends and
>> replaced it using 1/8" copper. I mounted a spare oil pressure switch
>> from an MGB, the one used for the anti-run-on valve, on the firewall,
>> then landed the cooper pipe on it. I used two MGB flex oil lines
>> coupled together to make one line long enough to go from the block to the
> switch.
>>
>> It's worked fine for years. Plus, if I ever get around to it, I have
>> the oil pressure switch available to wire up a buzzer to let me know
>> if I lose oil pressure.
>>
>> I can take a pic of the firewall rig if you like.
>>
>> Wray
>>
>>
>> -----Original Message-----
>> From: webuck1 <webuck1 at cox.net>
>> To: zmagnette <zmagnette at autox.team.net>
>> Sent: Sun, May 11, 2014 10:59 pm
>> Subject: [Zmagnette] Oil pipe
>>
>> I am almost done with my engine rebuild. My Z has that plastic pipe
>> (brittle and
>> broken) for the oil line to gauge. I want to put the copper or metal pipe
> in.
>> One from an MGA was given to me. What do I need to do to connect this
>> all up. I believe I need the flex hose and connector as in the MGA but
>> I am not sure of the fittings on each end. Will I need any adapters on
>> either or both ends? Any and all help is always appreciated. Thank you in
> advance.
>> Buckey in AZ
>> _______________________________________________
>> Zmagnette mailing list
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/zmagnette/wraylemke@compuserve.c
>> om
>>
>> _______________________________________________
>> Zmagnette mailing list
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/zmagnette/wraylemke@compuserve.c
>> om
>>
>>
>> _______________________________________________
>> Zmagnette mailing list
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/zmagnette/slgrundt@gmail.com
>>
>>
>>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
>
<http://autox.team.net/pipermail/zmagnette/attachments/20140515/44854c04/att
> achment-0001.html>
>
> ------------------------------
>
> Message: 2
> Date: Thu, 15 May 2014 21:07:33 -0700
> From: <webuck1 at cox.net>
> To: List for the Z Magnette Group - North America
> <zmagnette at autox.team.net>
> Subject: Re: [Zmagnette] List Problems
> Message-ID: <20140516000733.4SIEQ.16648.imail at fed1rmwml114>
> Content-Type: text/plain; charset=utf-8
>
> I an having difficulty with HTML's being scrubbed, which means I am not
> receiving any pictures and such, so I am missing out. I will send Chris a
> screen shot of what I am receiving so he can see it. I may just end up
> deleting and starting over on the list. Maybe a virus? I'm not sure and I
am
> not a computer tech guy. Very frustrating.
> Buckey
>
> ---- Allen Bachelder <bachldrs at comcast.net> wrote:
>> To those of us who have been automatically removed from the list due to
> "too many bounces"...
>>
>> I just now went through the entire list and found 28 of us (including
> myself) who were "kicked out of the club", and I've now reinstated all of
> us. If my action had the appropriate effect, you should all be receiving
> this message. (If you didn't, please let me know ;-) ... ) This
happened
> on May 8th, so some of you might not have noticed yet that you were
> off-list. While I don't understand why this happened, it is apparently
due
> to some changes made at Yahoo and AOL. However, those removed from the
list
> were from ISPs all over the map. Some were Yahoo and aol, many more were
> not. And some yahoo and aol addresses were not affected.
>>
>> For the moment, I hope all is well. If you hear that you have been
> removed from the list for any reason, remember, the email to remember is
> bachldrs at comcast.net.
>>
>> Cheers,
>> Allen
>> ****************************************************************
>> Allen & Florrie Bachelder =iii=<
>> Spring Creek Home for Wayward MGs
>> '57 ZB, '65 B, '69 C/GT, '73 B/GT
>> North Street, MI 48049, USA
>> http://www.mgexperience.net/member/bachldrs
>> NAMGAR GT39 - REGISTER TODAY!
>> http://www.namgar.com/events/article/gt-39_ottawa_ontario/gt-39_get_re
>> ady_for_a_whole_lot_of_fun
>> **********************************************************************
>> ************************************************
>>
>>
>>
>>
>>
>
>
> ------------------------------
>
> Message: 3
> Date: Fri, 16 May 2014 07:30:47 -0700
> From: michael mitchell <mdmzoila at hotmail.com>
> To: List for the Z Magnette Group - North America
> <zmagnette at autox.team.net>
> Subject: Re: [Zmagnette] Workshop Manuel
> Message-ID: <BAY178-W2994EAC07B171B217EBAEDDA310 at phx.gbl>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Hi Allen, IF You Could PLEAZE Pazz this On, Az Stated, Many E-Mail'z
Back.
> I Have an Original BMC Counter/Part'z Manual from the Old BMC Dealership,
on
> Van Ness Ave (S.F.) that waz Given to Me.
> It Contain'z the BLOW-Up/Exploded View'z of EVERY Single Part on the ZB
> Magnette, Including ORIGINAL Part#'z.
> If a SPECIFIC Part/Part# or Page iz Required, I'll Do My BEZT to Copy it
&
> Pazz it On to Our "GANG".
> GraciaZ, Michael.
> "Ya Neva Kno".
>
> From: bachldrs at comcas ft.net
> Date: Thu, 15 May 2014 00:47:36 -0400
> To: zmagnette at autox.team.net
> Subject: Re: [Zmagnette] Workshop Manuel
>
> I also believe Cecelia knows every single part number for every part on
ANY
> MG. If we all had minds like Cecelia, for lack of need, computers would
> never have been invented. She knows Magnettes incredibly well and she
> remembers customers just as well as part numbers. NOS Parts is also her
> enterprise. Next to Lou, she is one of the most valuable human resources
we
> have. If you don't know her, just getting to know her is, in itself worth
> the cost of an entire NAMGAR GT.
> Cheers,Allen
>
> ****************************************************************Allen &
> Florrie Bachelder =iii=<
> Spring Creek Home for Wayward MGs'57 ZB, '65 B, '69 C/GT, '73 B/GTNorth
> Street, MI 48049, USAhttp://www.mgexperience.net/member/bachldrsNAMGAR
GT39
> - REGISTER
>
TODAY!http://www.namgar.com/events/article/gt-39_ottawa_ontario/gt-39_get_re
> ady_for_a_whole_lot_of_fun
>
****************************************************************************
> ******************************************
>
>
>
>
> On May 15, 2014, at 12:33 AM, Steve Hanegan wrote:Call Cecilia at
> Scarborough Faire ( http://www.scarboroughfaire.4mg.com/ ) - (800)
> 556-6300. She has reproduction manuals. What is even more helpful, in my
> opinion, is the parts manual. Cecilia also has these. I have a set of
> reproduction ones for the shop and a set of originals (AKD-688 for parts
and
> AKD-573 for service). There are a number of superb used automobile book
> vendors - Vintagemotorbooks.com and books4cars.com are a couple of local
> folks to me, though both ship.
> Cecilia is a good resource for a surprising number of Magnette items -
more
> than she actually lists in her catalogs.
> Steve H.
> On May 14, 2014, at 6:22 PM, "Jon Marino" <jonnyprecious at comcast.net>
> wrote:Hi folks, I just bought my first Magnette last week and I am new to
> this list. I am looking for a workshop manual for a 1958 Magnette ZB. Any
> leads? Best, Jon M._______________________________________________
> Zmagnette mailing list
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/zmagnette/steve@betterwitnesses.com
>
>
> _______________________________________________
> Zmagnette mailing list
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/zmagnette/bachldrs@comcast.net
>
>
>
> _______________________________________________
> Zmagnette mailing list
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/zmagnette/mdmzoila@hotmail.com
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
>
<http://autox.team.net/pipermail/zmagnette/attachments/20140516/b695883e/att
> achment.html>
>
> ------------------------------
>
> _______________________________________________
> Zmagnette mailing list
> Zmagnette at autox.team.net
> http://autox.team.net/mailman/listinfo/zmagnette
>
>
> End of Zmagnette Digest, Vol 8, Issue 44
> ****************************************
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2014.0.4577 / Virus Database: 3950/7502 - Release Date: 05/15/14
>
> _______________________________________________
> Zmagnette mailing list
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/zmagnette/paul.barrow@centurytel.net
>
> _______________________________________________
> Zmagnette mailing list
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/zmagnette/steve@betterwitnesses.com
>
More information about the Zmagnette
mailing list