I have an Alpine Series II (9118102) My spare 1592 is on the engine stand
in the garage, ready for final assembly. I got the stock cam reground to
stock specs, but before I put it in, I thought I would check if anyone has
any experience with other grinds/manufacturers. My car will be set up with
the twin Zenith carbs, and is strictly for street use, so it must have a
reasonable idle and low end. (If I wanted a FAST car, I'd probably have
something else :-)
All suggestions welcome!
Brian Hutchison
brian(at)harpo.ampr.ab.ca __________________________________________ Gumball
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 09:13:41 CDT