The F4B manifold with Holley 600 cfm carb and stock aircleaner will
clear the stock hood. Installation of a spacer under the carb will
cause interference. He will have to remove or shorten the bowl vent
tubes on the Holley in order for the stock Tiger air cleaner to work.
I have the same setup on my 65 with the motormount heat shields and
associated washers in place. Wally Swift's car has the same setup also.
He should also pay attention to where he hooks up the PVC valve. A
lean miss can result if it is hooked up to a runner instead of the plenum
area.
Tom Calvert
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 09:18:10 CDT