>Date: Thu, 1 Feb 96 08:51:27 PST
>From: winbladg(at)apps5.credence.com (Gary Winblad)
>To: alpines(at)autox.team.net, tigers(at)alpine.b17a.ingr.com
>Subject: Brake servo rebuild
>
>
>I'm tearing apart an old brake servo, does anyone have a good
>method to remove the "plug" at the end of the small bore? This
>one is kinda stuck.
>
>Gary
Gary, I once used compressed air to get the piston out of my master
cylinder, I had inadvertanly istalled the seal backwards and it was really
stuck. So I used my air compressor and piped air in through the brake
fluid inlet while plugging the other outlet with a rag. This method might
work for your servo plug if you soak it good with liquid wrench first. You
might want to point it towards a wall and away from anything breakable as
it might fly out with force. Although my piston came out real slow, my
compresser was tiny.
Regards Armand Ritchie
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 09:19:50 CDT