Alpine clutch
nyclewit(at)nyhp03.serigate.philips.nl
Thu, 6 Jun 1996 19:59:34 +0200
-------------------------------------------------------------------------------
To: alpines(at)autox.team.net
From: "Bert Clewits" <nyclewit(at)nyhp03.serigate.philips.nl>
Subject: Alpine clutch
-------------------------------------------------------------------------------
Thanks for all your info.
The clutch slave cilinder is as far backwards (towards the tranny)
as possible with some extra spacers as well.
The bleed nipple is on top !
The main cilinder is obviously the origional 5/8 inch (16mm).
So I better get a bigger bore main cilinder to make it work.
Regards, Bert