T.J. Wrote,
>Dick, you are correct on all counts. This bulletin is on the web at
>http://www.team.net/www/rootes/rsb/66_06.html and recommends that the
>1600cc relief valve be used on the 1725 engine.
The late relief valve that is available from S.S is that from an 68+
Arrow or Rapier.
It does fit some of the later SV alpine oil filter blocks.
The "Arrow" part is the exact part that I recommend for the adjustable
relief valve
and at around $30 for both valve and filter base, how could you go
wrong.
The newer relief valve, will still only give you around 50 PSI though,
Although it is far less likely to stick open.
Jarrid Gross
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 09:36:54 CDT