O.K., so what radiator cap should I be using on my series II? The stock
cap is 7 lbs. Someone recently suggested 10 to 13 lbs. Does anyone know
what works and what is actually too much. My 7 lbs. cap is inadequate in
that it start to boil over at about 190 degrees. I have been reluctant to
increase the lbs. on the cap for fear that the radiator pressure would be
too great and might destroy the heater core and other pressure sensitive
parts.
Bill Lewis
Series II
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 09:43:59 CDT