Heuer, Paul wrote:
>
> Alicia Laris <larisab(at)ix.netcom.com> wrote:
>
> <<snip>>
> it has 2 Zenith WIP or WIA carbs. By the way I also have a 67 SV that is
> <<snip>>
>
> What is the difference between WIP and WIA carbs? Is one type bigger,
> better, than the other? Which type were original on which model?
>
> The reason I ask is that my S3 (#3022) is supposed to have WIP carbs
> (correct?), but it actually has WIAs fitted. They will need overhauled at
> some stage, and I need to decide whether I rebuild the WIAs, try to find a
> pair of WIPs, or go for something better. Hmmm, that's another topic, what's
> the best carb setup for a stock engined street runner?
>
> Cheers,
> Paul.
> B9203022
> ------------------------------
Paul:
Your series III came with 2 WIP 3's OR 2 WIA 3's (GT) A main
difference between the WIA (2 and 3) and the WIP is the "economy
diaphragm" which is located under a small cover with 3 screws and a bump
on top (on the WIA 3) located on top of the float chamber. This
diaphragm comes in a WIA kit.
The WIA 2 (which was used on S. I's and II's) and 3 appears to have an
additional part called the "bypass valve" under the same cover which
does not appear to be in WIA kits and came in two sizes.
The WIP 2, however, has a flat cover called a "blanking cover" and
beneath it, a "blanking plug"(in place of the bypass valve). This
appears to have been an option with the WIA 3's as well.
The above all came from the blow-ups in the 66 Rootes Parts Manual,
and there also appears to be differences in the size of the high speed
bleed jets (and possibly others as well) between WIP 2's and WIA 2's.
I would guess that the diaphragm was intended to operate the valve to
lean out mixture or acc. pump at certain vacuum and produce "economy"
but could be blanked out if you didn't care about economy. Also, the WIA
carb seems to be associated in S. I's and II's with a "Micro Element
Filter" which reQuired a different bypass valve.
This is probably more than you really wanted to know already about WIA
and WIP but let me know if you need jet sizes. (does anyone know where
we can get replacement jets?)
Ron Tebo - Series I - B9000627
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 09:44:17 CDT