That's a lot heavier weight (thicker) than 30W. Change it as soon as you
can because the transmssion will not like it if you keep it in there too
long. It has to do with the temperature of the gears and the ability of
the thick oil to lubricate well in the small bearing surfaces of the
transmission.
Serg
Tom Yang wrote:
>
> O.K. so I should use 30 weight motor oil in my Transmission. Is 80W-90
> Thicker or thinner. I always forget how these multi weights work. I topped
> my leaking transmission with some of the stuff just to keep the damaging
> the transmission from being low on oil. I'll drain it as soon as I get a
> chance and put in the 30 weight. I may try the 40 weight to keep the seals
> from leaking. It didn't start leaking until recently, so I'm hoping the
> right grade oil will stop the leaks.
>
> Tom
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 09:47:43 CDT