Paul wrote,
>I have B9203022, which should have twin downdraught Zeniths, but I
>would=20
>like to confirm the model number of the carbs - ie. 36WIP-3 or
>36WIA-3. I=20
>have conflicting information.
If yer Alpine be a GT, It should have the paper element and 36WIA-3
carbies.
Otherwise, It should have the Metal Gauze elements and 36WIP-3 carbies.
>The carbs need rebuilding and I don't want to throw money at the wrong
>ones.
>Cheers,
>Paul.
There are no actual differences between the carbs as far as rebuilding
goes,
except the power valves "or lack therof" used on the WIA carbs.
WIA carbs are convertable to WIP and vice versa.
As far as rebuild kits are concerned, there is only one, and it includes
the
power valves.
Dont waste your money on the carbs if the throttle shafts are worn.
The zeniths are good carbs, but run pretty poor when the shafts start
to leak any significant air around the butterflies at idle.
We really ought to find someone to make some shafts up as they are not
available.
Jarrid Gross
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 09:47:59 CDT