Kurt Eckert asked,
>Does anyone have an easy way to press these things out? I need to
replace both
>the lowers and uppers. Also, does anyone know where I can get a set of
uppers?
>Most people seem to be out of stock.
The early suspension is especially a problem here, because the control
arms and the bushes are both steel.
Fixturing is required to keep from bending up the control arms, as
was a torch and dry-ice.
Not for the timid or weak spirit.
Your local machine shop will definately ruin your control arms
in the process of the easy fix.
Jarrid Gross
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 09:55:30 CDT