Karl Gilchrist wrote:
>
> Subject: Re: Windshield and rust
> Date: Thu, 11 Sep 1997 21:34:50 +1300
> From: Karl Gilchrist <xtr25618701(at)xtra.co.nz>
> To: "John C. Slade" <edalsj(at)igs.net>
> References: <B03C5178-3A2B2(at)207.210.11.68>
>
> John C. Slade wrote:
> >
> > Hi Patrick,
> >
> >.......................................................... What is
> > happening is that the windshield frame is rusting away inside the
> > rubber for whatever reason. The fix is to remove the windshield and
> > frame and repair/replace whatever metal has deteriorated. .......................................................................
> > This is an ideal job for a small MIG welder, or a small gas tip. ........................................................................
>
> I agree but take care if the rust is extensive. My panel beater repaired
> mine and some how altered the dimensions when it was welded back with
> disasterous results when we tried to fit the windshield. Required lots
> of swearing and stretching with hydraulic rams before we could get the
> screen to fit (after a fashion) I have another frame which also needs
> repairing but before we do any thing I will built some sort of jig to
> hold everything in the right position.
>
> Karl
Karl you have hit it on the head , about seting up a fixture of sort.
haveing been a weldor for many years , any time i had thin metals or
close tolerances to work with , i made notes took pictures and if needed
made stiffeners to re-adjust screws, bolts and the such. always remember
metal moves all the time you are welding and most times it will need
assistance in re-setting in place.
chuck series ll ,
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 09:55:56 CDT