Russell Maddock wrote:
>
> I'm about to refit the above to my RHD Series III about five years after
> I took it out. Trouble is I have a part I'm not sure what to do with.
> The master cylinder itself looks like an oversized version of something
> Sherlock Holmes might have smoked - well maybe not Holmes, Dr Watson
> perhaps. In my bag of parts is a piece of alloy with two little holes
> and one big hole cut in it to match the end of the master cylinder which
> bolts to the bulkhead. Is this piece of alloy a spacer, to fit between
> the cylinder and the bulkhead?
>
> Russell
Russell:
In a quick check of the parts manual, I found a part that matches the
above description described as a "packing piece for master cylinder"
(Plate A+B #111) However, it is not associated with the regular master
cylinder that you describe but with what appears to be a replacement
(and I can't find a listing for that cylinder - Plate A+B #96)
Go to the TE/AE site to look at these plates under "Brakes and
Controls".
Hope this helps!
Ron Tebo
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 10:03:51 CDT