Jerome,
Great question! I have tried buffing them out carefully with a
buffing wheel and using plastic rouge. That gets the gloss back but it still
does not restore the color completely. Since it is always the top half that
is discolored I think it is caused by sun fade. It seems like the
discoloration is fairly deep in the plastic. I have not tried sanding all
the way through the discoloration before buffing because I'm not sure you
could get all the sanding scratches out without overheating and then
distorting the surface of the plastic. I have seen them painted with gloss
black but it does not look quite the same and it is then subject to
chipping. I will also be interested to see what others have found. Perhap
this is a part that just needs to be reproduced.
Dave McDermott
At 09:11 AM 2/12/98 -0700, Jerome Yuzyk wrote:
>The 2-piece plastic cowl on my steering column has become brown-ish and
>mottled. I presume it used to be black. Has anyone re-coated or buffed
>these to make them black again?
>
>--
>
>- J e r o m e Y u z y k | jerome(at)supernet.ab.ca -
>- BRIDGE Scientific Services | www.tgx.com/bridge -
>- Sunbeam Alpine Series II #9118636 | www.tgx.com/bridge/sunbeam -
>
>
>
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 10:07:06 CDT