The head on my impact screw driver detaches from the part you hammer on. It is half inch drive and you can use it with a breaker bar and an extension. This has worked on many of the door screws I have attempted to remove. Use care and make sure the bit is a good fit for the screw or else you will have to get the drill set out.
----------
From: DON HILL[SMTP:big.baby.bella(at)worldnet.att.net]
Sent: Wednesday, April 29, 1998 10:32 PM
To: alpines(at)autox.team.net
Subject: DOORS
I am attempting to complete body work and get ready for painting my 67
Alpine.I have not tried to remove the doors before because it did not
seem necessary,but now I think it will be much easier to prep the car
for paint with them removed.Anyone have experiences good or bad about
this and any tips on the easiest way to rmove doors.Some of the screws
holding the hinge on are very hard to get to...Thanks
I almost forgot does anyone have any good ideas on matching original
colors with paint types available today particularly white....
Don Hill
67 Alpine series V
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 10:10:13 CDT