>I am using the proper pulley on an Alpine GT engine.
>I do not know if this combination is loosely fitting or not but I
>desperately need to seal it.
>Any thoughts would be appreciated.
>Doug
If your timing cover is not properly aligned with the pulley then you could be in trouble. If the pulley makes contact with the cover irrepairable damage could occur to both the pulley and cover. If neither are damaged, then I am sure you could obtain seals from Sunbeam Specialties or Classic Sunbeam. I suggest you modify the cover and pulley to accept a modern seal. I am currently in the process of doing this mod. I have a friend who will do the all the necessary work for $80 if you provide cover, pulley and seal. Let me know if you are interested and I will give you the details.
Christopher