> The traditional method (given access to electronic tool is not available)
> is:
> 1. To drive as close as poss to a smooth surface (wall, garage door etc.).
> Must be on flat surface.
> 2. Place 2 crosses (horiz + vert lines) with the centre centred to the
> headlight lens.
> 3. Reverse +/- 3 metres (10ft for you luddites)
> 4. Main beam should point at the centre of the cross.
> 5. Dipped beam should be in the lower right quadrant for cars which drive
> on the wrong side of the road,
Where I am most of the time ~(8>(
> lower left for those in England etc.
>
> Hope this helps.
Does thank you VERY mucho. Julian.And thanks to Sergio , I'll check out the store thing.
Chuck , soon to see straight.