lauri(at)lorenzo.pp.fi (Lauri Lehtinen) writes:
>* Once slave cyl rubber "piston" got old and ripped. After replacing I
>could not bleed the system. Finally I drove the car nose down in a steep
>hill. Few bubbles came from the "nose" of the main cyl and it has been
fine
>after that.
It sounds like the hydraulic line is attached to the wrong hole. It is
supposed to be attached to the bottom hole, and the bleeder valve is
supposed to be attached to the top hole. That way the air is pushed up and
out.
Jay
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 10:15:18 CDT