I had a problem like this.
I found that at the bottom of the stick shift the mounting plate and ball
and spring were out of grease.
When things got hot they ground between themselves leaving metal filings.
I added grease.
My shifting is fine now.
dgb
8:00AM
>
>>The 25 spline tranny I squeezed into my Series I is behaving strangely.
>>When cold, it works fine, when hot it becomes stiff and vague. Especially
>>bad between second and third. The electrics work fine, it's just tough
>>getting there to throw the switch. Oil is full. Anone else experienced
>>this?
>
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 10:15:20 CDT