Re: Heater core

From: Paul Heuer (paul.heuer(at)dsto.defence.gov.au)
Date: Thu Sep 24 1998 - 18:50:54 CDT

Next message: B&C Mustang: "Re: Pressure caps and heater cores"
Previous message: Rex Funk: "Re: Serial Numbers"
Maybe in reply to: Robert J.Jaarsma: "Heater core"
Next in thread: Frank Marrone: "RE: Heater core"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Many thanks to those that offered advice on my overweight heater core.
When I bought the car it had a (broken) 10lb rad cap. After much hunting
I found the correct cap and replaced it. I will try *gently* pushing on
the sides to see if it will give enough to get it out of the hole.

Cheers,
Paul.

--

Next message: B&C Mustang: "Re: Pressure caps and heater cores"
Previous message: Rex Funk: "Re: Serial Numbers"
Maybe in reply to: Robert J.Jaarsma: "Heater core"
Next in thread: Frank Marrone: "RE: Heater core"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 10:16:30 CDT