Hi all. About 5 years ago I had the same problem with an unremoveable thermo
housing. After fiddling with it for awhile, I took it to a machine shop and
they were able to drill out the studs and save the housing. I also had other
work done, but the price was about $50 and that included the head redrilled
and tapped for new studs.
Even buying a new housing (if available) you will or should have the old suds
removed because the only other way of getting the part off is to cut it off.
Good luck.
BAD
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 10:16:34 CDT