(no subject)

From: Mitchel Wolos (mwolos(at)hotmail.com)
Date: Mon Oct 19 1998 - 13:32:38 CDT

Next message: Bob Hamilton: "re: brake pull...it's driving me nuts !"
Previous message: CHUCK NICODEMUS: "Re: Brake line"
Next in thread: Mitchel Wolos: "(no subject)"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

I read one one of the messages that the sunbeam uses the same bolt
pattern as the Pinto\Mustang II I would like to know if the
calipers/hubs, spindles are the same. Also I have a chance to buy a set
of mustang cobra rims 1994-up bolt pattern I have an 8.8 inch rear for
it so I can find the axils but on the front side I need to know if
mustang spindles\hubs will go on or if the hubs will go on the factory
spindles?

Next message: Bob Hamilton: "re: brake pull...it's driving me nuts !"
Previous message: CHUCK NICODEMUS: "Re: Brake line"
Next in thread: Mitchel Wolos: "(no subject)"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 10:19:21 CDT