>Larry...probably are but if you get in a pinch get a piece of mild cold
>rolled steel and make your own....heat the 90 degree bends cherry red when
>bending and allow to cool slowly so they don't crack!
I have a such in place, but the fixing holes are not accurate. Thus I have
problems with the rear bearing in my generator.
I will cure it, but if I hit a spares Hillman, I take those parts into my
pocket.
£arry
£auri Lehtinen
Lehtipuu Oy
Kirkonkyläntie 83
00780 Helsinki
+358 400 851988
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 10:21:37 CDT