Listers,
Can anyone direct me to a place that sells moulded 90 degree (short
radius) heater hoses with 1/2" I.D. and a maximum 3/4" O.D.? The O.D. is
equally important as it has to fit through a hole in the side of the heater
to reach the inlet tube. The original ones were the type with fabric on the
outside and a 1/8" wall thickness.
I have been struggling with two sent to me from G.B. and carefully ground
down the O.D. but hit the imbedded reinforcing material and ruined them
(still not small enough).
Thanks,
Bob
=========================================================
Robert (Bob) A.C. Hamilton, Waverley, Nova Scotia, Canada
The Man of Many Sunbeams - Alpine, Drophead and Saloon 1953-1954
Home Page: http://www.navnet.net/~hamilton/index.html - REVISED!!!
E-Mail: hamilton(at)navnet.net
=========================================================
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 10:22:35 CDT