Jarrid,
There is a 5th hole but no screw on the face. I got alot done today and looking forward to
later this week when I can work on the brakes and clutch. Then its off to get it inspected and
licensed.
Rob
Jarrid Gross wrote:
> Robert Wiseman wrote:
>
> > Jarrid,
> > Thanks, I'll give the heat a try. I was working on my Beam this morning, and forgot to
> > look at the brake drum, but I dont remember seeing the flathead screw. Where should I be
> > looking.. Is it inside through the hole I see in the face of the brake drum?
> > Rob
>
> No, its between two of the 5/8 bolts. The screw has the same function as the
> 4 bolts, its just smaller. Later drums dont have the screw hole, so perhaps you dont have
> one.
> If it was there, the drum would have 5 machined holes, 4X 3/8 and 1X1/4 with a chamfered
> recess for the flathead screw.
> If its not there, dont worry about it.
>
> Jarrid Gross
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 10:26:44 CDT