Andy Walker wrote:
> Robert:
>
> Unless the early series cars are different, the paint code is stamped into
> the serial plate rather than silk screened on. I don't know what series of
> Alpine you have, but both my Series V and Tiger have their paint codes
> stamped and, to my best recollection, I have never seen a Sunbeam done any
> other way. What you are probably looking at is the spec plate with all the
> lubrication, etc. data on it.
>
> Have a good one,
> Andy Walker
>
> BTW, the paint code will be the lone 1, 2 or 3 digit # sitting out by
> itself on the serial plate.
Andy:
The early series cars appear to be different. My Series I (B9000627) has no
paint code and only the body # (630) following
the serial # on the ID plate (and on the right side body # plate).
Ron Tebo
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 10:27:19 CDT