kurt.eckert(at)tfn.com wrote:
> As part of my purchase from Bob, I have a Holbay cylinder head on the way. I am
> going to immediately drop it off at the machine shop for a rebuild. However,
> before I do that I need to know if it requires special rocker arms, springs,
> valves etc. I would like to get the parts ordered, if in fact I can find them,
> before the car arrives.
>
> Thanks in advance,
> Kurt "Holbay Head" Eckert
Hey Kurt,"ready to spar in GPL?"
There is nothing special about the valve gear on the holbay, save perhaps
the valve sizes, and that Holbay may have fitted the Oteva high rate springs.
The spring rate could be measured and compared with stock figures,
and the valve heads could also be measured for replacement.
The Oteva springs should be used only if you plan opperation above
6000 RPM.
Jarrid Gross
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 10:28:24 CDT