Rob wrote:
>I went out to the car( SV on jack stands ) put a rim on the rear hub
>and started spinning, After 9 revolutions of the rim I had counted 19
>revolutions of the drive shaft. Doing the math I get 2.11 turns of the
>drive shaft to 1 revolution of the wheel. Can anyone tell me by this
>information if I have a 4.22 or 3.89 rear end?
2.11 is 1/2 of 4.22. You were turning one wheel. So, the differential was
splitting the rotations in half. So, bingo you've got a 4.22.
Jay
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 10:34:58 CDT