robert nanzig wrote:
> I have a Robbins Top tonneau on which I need to install the snaps. Any
> tips on how to proceed so I will get a nice fit, and tips on attaching
> the snaps? The studs are still on the car from a previous tonneau.
Well Robin you are in luck that the studs are there. What I did was have
my bride hold the position of the cover at the back. First we marked all
of the studs with white chalk, pressed the material on to the chalk.
Installed the snaps on the dash section., then applied the cover there.
Then pulling very tautly marked the back and installed the back section.
from there it was a piece of cake,,,but you cannot doit alone very easy.
good luck
chuck series ll
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 10:39:45 CDT