I'm not sure if my series I has the original radiator, but I do have a 7lb
cap. Not original.
Rob
Ron Tebo wrote:
> robert nanzig wrote:
>
> > What is the correct radiator cap for my SV? I have a 13lbs cap, but I
> > seem to remember some discussion about this recently. Was the 9lbs cap
> > recommended?
> > Christopher
> >
> > For some reason I have a 7 lb cap on mine. I don't recall what led me to
> > choose the 7lb but I thought I was making an informed decision at the
> > time.
> >
> > Rob Nanzig
> > 67SV
>
> Christopher and Robert:
>
> According to the 66 parts manual (S. I-V), 9 lb. pressure was supplied
> from S. III onwards.
>
> Series I (welded ex.tank) appears to be a pressure cap (no pressure
> specified)with over-flow in the neck, while Series II (cast aluminum ex.
> tank) from B9104563, had a plain cap and 7 lb. pressure relief valve and
> overflow mounted on the tank right hand end.
>
> Anyone know whether the welded ex. tank series I's were pressurized and if
> so, what pressure? (Mine has a series II tank).
>
> Ron Tebo - Series I - B9000627
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 10:44:51 CDT