Hi,
I have checked and replaced all of the obvious. I thought I had it narrowed
down to a bad vacuum advance line, but no luck. Both springs are in place
and the alignment of the diaphragms is correct. I'm going to recheck the
float height and double check for blockage. Wish me luck. - Ian
-----Original Message-----
From: Ron Tebo <tebomr(at)cadvision.com>
To: Ian Spencer <toyguy(at)gte.net>
Cc: alpines(at)autox.team.net <alpines(at)autox.team.net>
Date: Sunday, May 09, 1999 8:59 AM
Subject: Re: I hate carbs!
>
>
>Ian Spencer wrote:
>
>> Does anyone have a manifold for a single downdraft solex that they would
be
>> willing to sell? I would also be interested in the linkage and firewall
>> bracket too.
>> I have tried everything to get my buddies Stromburgs working again. I
have
>> completely rebuilt them and tweeked and adjusted them like crazy. THEY
STILL
>> WON'T WORK! I think I'm going to just toss them in the trash and get him
a
>> Weber.
>> Desperate and Frustrated,
>> Ian Spencer
>
>Ian:
>
>Are you sure something else hasn't gone wrong coincidentally ? I remember
>having a similar frustrating experience for a long time with a four-barrel
and,
>after days of re-D0ing everything, discovered a two-inch long split in the
>bottom-side of a vacuum hose!
>
>Ron Tebo
>
>
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 10:48:18 CDT