Toggle switch ring tool

From: Scott Donnelly / Journey's End Marina (oharajem(at)free.midcoast.com)
Date: Tue May 25 1999 - 12:24:21 CDT

Next message: LSheeley(at)aol.com: "Alpine List Hat"
Previous message: Chuck Nicodemus: "Re: SUNI III Caravan Info."
Next in thread: Alpdavegre(at)aol.com: "Re: Toggle switch ring tool"
Maybe reply: Alpdavegre(at)aol.com: "Re: Toggle switch ring tool"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

I am in the process reassembling my dash after veneering it with mahogany
and 12 coats of varnish. I originally removed the threaded toggle switch
rings with needle nose pliers but I don't want to risk slipping and gouging
the newly refinished dash so I either need to find or make a proper tool. Is
this an auto parts store item? Otherwise I will make a tool from a small
piece of steel bar, drill an appropriate size hole, cut off the end through
the center of the hole and bend over the tabs to fit the 2 notches in the
switch rings. I can make this tool at work but forgot to bring a ring for
sizing... Question: what is the INSIDE DIAMETER of these threaded rings? Thanks!
Scott Donnelly
SV

Next message: LSheeley(at)aol.com: "Alpine List Hat"
Previous message: Chuck Nicodemus: "Re: SUNI III Caravan Info."
Next in thread: Alpdavegre(at)aol.com: "Re: Toggle switch ring tool"
Maybe reply: Alpdavegre(at)aol.com: "Re: Toggle switch ring tool"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 10:48:58 CDT