Hi,
I was doing some routine maintenance this weekend. One if the things I
needed to replace was a bulb for the right rear brake light. The other
was the turn signals. I had noticed that they were only working to the
right and not the left. After closer inspection I noticed the left front
bulb wasn't even illuminating and the rear was. I removed the glass
lense to replace the bulb, and noticed that there were no contacts left.
The brown phanolic disk that holds the wires was broken in half and the
wires were totally gone. Obviously when I had the blow out a couple of
weeks ago, The thrashing rubber from the tire had ripped them out. The
bullet connectors were neatly unplugged from the sockets, so there was
no damage to the wireing harness, but the wires to the turn signal are
totally gone. There are two wires. Green with a red tracer and solid
red, with bullet connectors on the harness end. I am interested in
buying a turn signal unit with these wires still in good condition.
(glass & chrome not necessary) Can any one help? This is the early style
S1, S2, S3.
Thanks,
Ian
-- Ian Spencer <www.sunbeamalpine.org> '61 Harrington Series 'A' B9104782 OD HRO '62 Harrington Series 'B' BH9115930 OD LRX
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 10:51:27 CDT