> Question #1: Where are the jacking points to remove the wheels (Babette
> needs new tires)?
>
The original Sunbeam jack fits into a square hole just under the bumpers,
one on each side. If the original jack is missing you can use a scissors
jack from most any modern car, just be carefull about placement, my car has
residual damage left over from people trying to use them improperly. I'd
try to place a regular jack against frame or cross member metal and not
along the edges of the car.
> Question #2: Where should I attach a rope to tow her a short distance?
>
Having towed mine enough you'd think I would remeber ;-) Just find
something that will not bind, bend, or interfere with steering. Lots of
heavy metal on the front end of these cars makes it relatively easy (just be
sure your brakes are working properly before you start!).
> Question #3: Is there a parts manual (exploded views) of the Series II
> available & if so where can I get it?
http://members.xoom.com/Rootes_1725/cont.htm
has an on-line version. Sunbeam Specialties also carries manuals (I believe
that Rick has one that covers the early series).
>
> Thanks in advance for any help,
>
> Kelly
>
> B9106500 "Babette"
>
>
>
>
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 10:52:03 CDT