In a message dated 6/14/99 8:01:43 PM Pacific Daylight Time, Phyrman5(at)aol.com
writes:
<< As what has already been said on the use of the later motor in the earlier
car, one other tibit needs to be changed, the oil pick-up for the oil pump
and then the oil pan.
Bruce
70 GT
>>
The aluminum oil pan from the GT is usable (and desirable) in the Series
cars.
The only real differences to remember are that the aluminum pan covers up the
entire bellhousing - no metal plate covering the lower part of the
bellhousing - no support rods. Two of the support rod holes in the
bellhousing line up with holes in the aluminum pan. Be sure to really
tighten these bolts to avoid vibration.
Dick Sanders
Seattle
"Big Sky in July"
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 10:52:17 CDT