RE: Brake Trouble

From: Kurt Eckert (keckert(at)terascape.com)
Date: Mon Jun 21 1999 - 10:40:41 CDT

Next message: herbeam: "Re: Oil Pan Sealing"
Previous message: david_kelly(at)ici.com: "RE: Brake Trouble"
In reply to: Dennis Osmer: "Re: Brake Trouble"
Next in thread: david_kelly(at)ici.com: "RE: Brake Trouble"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

I was wondering about the possibility of this being heat related. But I kind
of discounted that because it continues to build up pressure even after
reaching running temperature. If it was heat related I figured it would stop
once the temperature stabilized.

Kurt

> -----Original Message-----
> From: Dennis Osmer [mailto:den114(at)cruzio.com]
> Sent: Monday, June 21, 1999 11:28 AM
> To: Kurt Eckert; Alpine folks
> Subject: Re: Brake Trouble
>
>
> Also check that there is play between actuation rod and master cyl piston.
> If there is no play, when the brakes heat fluid is returned and the brakes
> apply.
> D
>
>
>

Next message: herbeam: "Re: Oil Pan Sealing"
Previous message: david_kelly(at)ici.com: "RE: Brake Trouble"
In reply to: Dennis Osmer: "Re: Brake Trouble"
Next in thread: david_kelly(at)ici.com: "RE: Brake Trouble"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 10:52:26 CDT