I wrote the 1-800 from Quentin's earlier message and have been looking at it
all day. I looked up "Pertronix" in the archives and read the string of
messages about them during the past year. Looked good! Then I was
wondering if Jim was the best person to get it from. What were my options?
Finally, Brent's message pushed me over the edge. Go ahead and do it!
I'll put in my feedback after I get it installed.
Robert Bailey
Sr V
> -----Original Message-----
> From: kasl [SMTP:kasl100(at)navix.net]
> Sent: Tuesday, July 13, 1999 1:22 PM
> To: Morris, Quentin J
> Cc: 'Alpines'
> Subject: Re: Electronic Ignition
>
> Ordered my Pertronix ignition system for the SII today from Jim per
> Quentin Morris instructions. $10 off TE/AE members. Look forward in the
> easy installation as I will let all listers know the results. Brent Kasl
> SIIAlpine,MK1 Imp
> Morris, Quentin J wrote:
>
> > All,
> > After following the on-line discussion of the Pertronix ignition system,
> I did some research on the web. I contacted them via their site and
> received a call back after some three weeks, but the rep offered the
> system to me for $69, i.e. $10 off the list price. Feedback from users,
> especially daily drivers, was unanimous...a great investment for savings
> in fuel economy and time. Plus, it is totally contained under the
> distributor cap.
> > The rep that assisted me, Jim, can be reached (at) 800.685.1492.
> > "Q"
> >
> > > ----------
> > > From: Jarrid Gross[SMTP:JGross(at)econolite.com]
> > > Reply To: Jarrid Gross
> > > Sent: Monday, July 12, 1999 4:11 PM
> > > To: 'jumpin'jan'; 'kasl'
> > > Cc: 'Alpines'
> > > Subject: RE: Electronic Ignition
> > >
> > >
> > > >Brent,
> > > > It seems to me the way to go is the Pertronics kit which sells
> about
> > > >$80.00. At the Cincinnati British car meet, this past weekend, I was
> > > >talking to Mark Weber (owner and driver of a fine looking MGB
> > > >E-production race car, #19X) about his digital ignition system that
> he
> > > >said costs about $200-$300 and its operating principle is very
> simular
> > > >to todays computer controlled system. It uses a crank position sensor
> > > >that fires a two coil system. No moving parts except for the shaft
> > > >encoder disk that can fit on the crank pully (looks about to be 8
> inch
> > > >diameter, thin disk). Anyone know of vendors to buy these things
> from,
> > > >forward the info to me and I'll post it on sunbeamalpine.org
> > > >Jan
> > >
> > >
> > > The system to which you speak is most likely the electromotive Tech3.
> > >
> > > It is laptop programable, and allows you to set your own curve.
> > >
> > > Few racing orgs will allow its use, except for contemporary racing.
> > >
> > > This system is overkill for most ignition needs, but van be handy
> > > to dial in all the ignition based improvements you can get.
> > >
> > >
> > >
> > > I have a friend who distributes for electromotive.
> > >
> > > His name is Lance Nist (949) 250-1797.
> > >
>
>
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 10:55:37 CDT