Herbeam writes:
I have successfully filled smal chips with a brush, dabbing an excess
amount of paint in the hole (often several applications to build the
paint up in the chip), followed by a drying period and very carefully
using a razor blade to slice off excessive paint, followed by polishing
compound. Its painstaking work but you can't tell there were chips when
you are done. HERBEAM
___________________
Bob, Thanks for the input. Do you use a particular brand of
polishing compound. Are they graded like sandpaper ie., fine, superfine
, 200, 400 etc. It seems that any polishing I've ever done on a small
area has ended up with polishing marks in a small area. Perhaps I've
used the wrong product.
Rob Nanzig
67SV
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 10:55:50 CDT