>Jarrid
>
>I have the same set up of a series II with a 1725 engine and similar oil
>pressures and have thought about fitting an oil cooler.
>Where do the pipes connect to? and where have you got it mounted?
>
>Dave Kelly
>1962 SII
On the SV cooler setup, there is a cooler adapter, which mounts between
the oil filter base and the engine block.
I prefer aftermarket coolers the the stock rootes cooler for the simple
reason that the rootes cooler has so little surface area, and the cooler
is not a full flow cooler.
On after market coolers, there is a screw on adapter that screws on where
the filter would screw on, and the filter then may be remote mounted,
or screwed onto the adapter.
Pegasus sells adapters, coolers and hose.
The coolers may be mounted wherever practical, the two openings inside
the front valance are a great location.
Hope this helps.
Jarrid
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 11:01:48 CDT