Lou wrote,
>Hello all,
> The windscreen for sale is off of a series II. The reason for the
angle
>on the bottom is because series 2 had a guide for the crank-up window that
>went to the top of the window, whereas a series 1 had a short guide that
>allowed the window to flop around because it only went up about 4 inches. A
>series 2 may fit a series 1, but there would be a triangle shaped gap. a
>Sries 1 will not fit a series 2. They can be MADE to fit each other with
the
>change of the side window frames. A series 3, 4, 5, Tiger has the same
>windscreen with stainless steel and sandwiched rust encourageing metal
>frame. The late and early wind screens will not fit either unless the cowl
>is modified to accept them, labor and cost prohibative. Hope that helps.
Lou
This is absolutely correct.
Terry, what you need is the side pieces from a SI frame.
I think I have a complete SI frame as when I bought my SII,
it had a broken windshield. A local wrecker had a complete
SII windshield with frame that I bought. Turned out it was
a S1 frame, but the windshield fit just fine in my SI frame.
Wanna trade something for the frame?
Jarrid
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 11:01:54 CDT