Rob writes:
> I am having trouble getting a good fit with my soft top on my
>series 5. The from bow is very difficult to snap down and without the
>front bow seal in place there is a big gap, 1/2"-3/4", between the bow
>and the top of the windshield.It's big enough to clearly see through
>from inside the car.. Does this seem right? Can anyone tell me how big
>that gap should be prior to fitting the front seal?
I had a similar problem once. I attributed it to the top shrinking while
it was in the boot for a number of years while the car sat with the hardtop
on it. It fitted fine before I stopped using it, and did exactly what you
described when I tried later. Since I neither changed nor adjusted
anything, this was what I assumed could be the only cause.
Jay
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 08:35:20 CDT