After many years and thanks to Ebay and Gary (and more dollars than I
would ever let on to my wife) I have managed to replace both my busted
wipac reversing lights. Trouble is its been so long since I took the old
ones out I can't remember how they wire up.
What I have now is a Green/Purple wire and a white wire coming out of
the lights. I also have a Green/Purple wire that runs in the loom for
the rear indicators stop lights etc. I presume this is the power feed to
the lights but not sure where it comes from. Somewhere there must be a
wire to the gearbox switch but how this fits into the circuit or the
purpose of the white wires is not clear. Any help appreciated
Thanks
Karl
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 08:38:57 CDT