Chris,
those fiendish British engineers used 2 bolts to hold the pedal assembly
in. Both are accessible inside the engine. One on the top of the
firewall and the lower one doubles as the top mounting bolt for the
master cylinder.
You either need a friend to hold one side, a lock on wrench to hold one
side or easier still, have 6 foot long arms so you can reach both at the
same time !! 8-)
Bolt heads are 1/2 inch AF.
have fun
Jeff
-- Jeff Howarth
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 08:47:02 CDT