Robert,
The oil pan is plenty strong enough but be sure to put a block of wood that
extends slightly past the sides of the oil pan and I would place it very
close to the edge of the front sump this is the strongest place for the
leverage you will need to raise the motor. You don't have to raise the motor
much. When putting in the new mounts be sure to leave all bolts loose till
you get all of them started. You may have to pry them around slightly to get
all lined up. Thats about all there is to it.
Dave
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 08:52:36 CDT