I believe that SS or Classic has them available for the Srombergs but my
problem is the bushings on the carbs are badly worn. I've been looking at
purchasing some bushing from McMaster Carr (a local supplier in CA) and
trying to repair an extra set of carbs I have but in the mean time, I bought
a new Weber DGV to see how it works on my stock SV. If you have a SIV
manifold, you could try one of these setups.
----- Original Message -----
From: "Cole Harvey" <ceharvey(at)thegrid.net>
To: "Alpine" <alpines(at)autox.team.net>
Sent: Friday, April 07, 2000 11:57 AM
Subject: Re: carbs
> Hi all,
>
> Thanks for all the help with my Zenith WIP carbs. I seem that the
throttle
> shafts are loose enough to allow air to slip past. So now how do fix the
> problem? On the spare carb I took apart the shaft seems very worn but the
> plate is not. Is there a source for now shafts?
>
> Thanks,
>
> Cole
>
>
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 08:55:48 CDT