Mike Proper wrote,
>silly question probably but,,,,,, My SV is about to be completed and has
>wire wheels. I have a parts car with steel wheels, I would like to keep the
>hubs from the parts car in case I choose to go to minilites or panasports
in
>the future. how does one swap out from splined hubs.
>
Good idea.
Keep in mind that although the front hubs are interchangable
to all year alpines, the SV rear hubs are exclusive to SV,
and S1 to S4 are interchangable within those years.
On the fronts, you replace the front disc and hub with the 4 hub
disc and hub. This is rather simple and straight-forward.
On the rear you have to pull the drum (no biggie), then pull the
splined hub (heres the hard part).
You will need to fab some tools to get the rear splined hub from
the axle.
You might want to check the archives for a description of the tools
that need to be made, if you cant find them, I will give you
instrructions how to make them.
Jarrid Gross
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 08:59:50 CDT